Best Quality Universal Turn and Screw-cutting Lathe Machine

List of components of a turning and screw-cutting machine:

1. Spindle headstock

2. Electrical equipment

3. Cartridge guard

4. Carriage

5. Cooling

6. Caliper guard

7. Caliper

8. Rear headstock

9. The bed

10.Lead screw guard

11. High-speed drive

12. The apron

13. Clutch control

14. Motor installation

15. The feed box

16. Gearbox (guitar).

List of turning and turning machine controls:

1. Push-button station for turning on the main engine of the machine

2. Electric coolant pump switch

3. Warning light

4. Introductory circuit breaker

5. The handle for setting a number of spindle rotation numbers (4 fixed positions and 3 intermediate positions)

6. The handle for setting the number of revolutions of the spindle (6 provisions)

7. Handle for setting the normal or increased thread pitch and position when dividing multi-entry threads

8. Handle for setting the right and left threads and reversing the feed

9. Handle for setting feed and pitch values

10. Handle for setting the type of work: feed and type of thread to be cut

11. The handle for setting the feed and pitch values of the thread to be cut and turning off the feed box mechanism when threading manually

12. Friction clutch control handle (braking and reversing the spindle)

13. Slide valve button for lubrication of carriage guides and the transverse slide of the caliper

14. Handwheel for manual carriage movement

15. Rack and pinion gear on and off handle

16.Inch thread adjustment handle (two positions: 11 and 19 threads per inch)

17. Carriage mounting bolt on the bed

18. A handle that duplicates the control of the friction clutch (braking and reversing the spindle)

19. A handle for turning on and off the nut of the lead screw

20. Flywheel for moving the tailstock pinole

21. The handle for attaching the tailstock to the bed

22. Tailstock pinole clamping handle

23. Handle, mechanical control by moving the carriage and the transverse slide of the caliper

24. The handle for manually moving the tool slides of the caliper

25. Switch on the local lighting lamp

26. Handle for manual movement of the transverse slide of the caliper

27. Adjustable coolant supply nozzle

28. Locking device of the introductory circuit breaker

29. Emergency Stop button. 

Information plates on the lining of the feed box in the amount of 3 pieces:

1. Graphic symbols for switching the feed box. 

Information plates on the lining of the spindle headstock in the amount of 7 pieces:

1. Table of revolutions, feed rates and threading steps. Thrust center for the headstock, chuck 3-cam self-centering diameter 315 mm, cartridge guard with locking, movable lunette, fixed lunette, set of interchangeable gears, conical ruler, stop micrometric longitudinal displacement, mechanized drive of the tool slide of the caliper, 4-position tool holder, protective cover of the tool holder with an observation window, lighting of the cutting area, a system for supplying lubricating and cooling liquid, a chip tray, a set of parts for exhibitions of the machine, vibration supports.  User manual .
2. The passport of this equipment.

Machine length – 3400 mm;

Machine width – 1270 mm;

The height of the machine is 1400 mm.

Net weight 3500kg